Preview

Chebyshevskii Sbornik

Advanced search

Nikolay Nikolaevich Sergeev, Doctor of Technical Sciences, Professor of Tula State Lev Tolstoy Pedagogical University — bright representative of the scientific school of physical fundamental and applied materials science M. A. Krishtal

https://doi.org/10.22405/2226-8383-2019-20-3-533-558

Abstract

The most important scientific problem solved under the guidance of Professor Krishtal M. A. was the problem of corrosion-mechanical destruction of high-strength reinforcing iron alloys. Much effort has been expended to solve this scientific problem of great applied importance. Complex regularities were established and the physical nature and mechanisms of hydrogen embrittlement and destruction of reinforcing high-strength steels used in composite reinforced concrete structures and structures in the form of fibrous steel reinforcing fillers were revealed. In the Tula region in solving this problem a significant contribution was made by a student of Mikhail Aronovich Krishtal – Professor Nikolay Nikolaevich Sergeev, who defended his PhD and doctoral dissertations under his leadership.

About the Authors

Aleksander Nikolaevich Sergeev

Russian Federation


Aleksander Evgenievich Gvozdev

Russian Federation


Mikhail Vitalievich Ushakov

Russian Federation


Pavel Nikolaevich Medvedev

Russian Federation


Yuriy Sergeevich Dorokhin

Russian Federation


Sergey Nikolaevich Kutepov

Russian Federation


Dmitry Vladimirovich Maliy

Russian Federation


References

1. Sergeev, N. N., Gvozdev, A. E., Sergeev, A. N., et al., (2016), Laboratory workshop on the course “Operational materials” [Laboratornyj praktikum po kursu .Ekspluatacionnye materialy.], TulGU, Tula, 96 p.

2. Sergeev, N. N., Gvozdev, A. E., Sergeev, A. N., et al., (2016), Modern problems of technical Sciences [Sovremennye problemy tekhnicheskih nauk], TGPU L. N. Tolstoy, Tula, 120 p.

3. Breki, A. D., Medvedeva, V. V., Krylov, N. A., et al., (2016), Liquid and grease lubricating composite materials containing dispersed particles of magnesium hydrosilicates for friction units of controlled systems [Zhidkie i konsistentnye smazochnye kompozicionnye materialy, soderzhashchie dispersnye chasticy gidrosilikatov magniya, dlya uzlov treniya upravlyaemyh sistem], TulGU, Tula, 166 p.

4. Krylov, N. A., Skotnikova, M. A., Breki, A. D., et al., (2016), Features of structural and phase transformations in titanium preparations in the process of high-speed plastic deformation [Osobennosti strukturnyh i fazovyh prevrashchenij v titanovyh zagotovkah v processe vysokoskorostnogo plasticheskogo deformirovaniya], TulGU, Tula, 202 p.

5. Kuzovleva, O. V., Gvozdev, A. E., Tikhonova, I. V., et al., (2016), On the state of pre-conversion of metals and alloys [O sostoyanii predprevrashcheniya metallov i splavov], TulGU, Tula, 245 p.

6. Shorshorov, M. H., Gvozdev, A. E., Zolotukhin, V. I. et al., (2016), Development of progressive technologies for obtaining and processing metals, alloys, powder and composite nanomaterials [Razrabotka progressivnyh tekhnologij polucheniya i obrabotki metallov, splavov, poroshkovyh i kompozicionnyh nanomaterialov], TulGU, Tula, 235 p.

7. Seledkin, E. M., Zhuravlev, G. M., Gvozdev, A. E., et al., (2016), Modeling of resource-saving processes of processing of metals and alloys [Modelirovanie resursosberegayushchih processov obrabotki metallov i splavov], TulGU, Tula, 204 p.

8. Sergeev, N. N., Gvozdev, A. E., Sergeev, A. N., et al., (2016), Resources of deformation ability of various materials [Resursy deformacionnoj sposobnosti razlichnyh materialov], TulGU, Tula, 172 p.

9. Sergeev, N. N., Sergeev, A. N., Provotorov, D. A., et al., (2016), Sample for determination of cohesive strength of gas-thermal powder coatings [Obrazec dlya opredeleniya kogezionnoj prochnosti gazotermicheskih poroshkovyh pokrytij]: patent No 166249, Russian Federation; applicant and patentee A. E. Gvozdev, 2 p.

10. Sergeev, A. N., Sergeev, N. N., Gvozdev, A. E., et al., (2016), Modern perspective materials and technologies [Sovremennye perspektivnye materialy i tekhnologii], TulGU, Tula, 87 p.

11. Sergeev, N. N., Sergeev, A. N., Zhuravlev, G. M. et al., (2016), Fundamentals of metal technology [Osnovy tekhnologii metallov], TulGU, Tula, 450 p.

12. Sergeev, N. N., Sergeev, A. N., Potapov, A. A., et al., (2016), Laboratory workshop on the course “Operation, maintenance and repair of the car” [Laboratornyj praktikum po kursu .Ekspluataciya, servisnoe obsluzhivanie i remont avtomobilya.], TulGU, Tula, 370 p.

13. Dorokhin, Yu. S., Sergeev, A. N., Sergeev, N. N., et al., (2016), Fundamentals of the functioning of service systems [Osnovy funkcionirovaniya sistem servisa], TulGU, Tula, 244 p.

14. Sergeev, N. N., Sergeev, A. N., Gvozdev, A. E. et al., (2016), Technological processes in service [Tekhnologicheskie processy v servise], TulGU, Tula, 248 p.

15. Zaenchik, V. M., Sergeev, A. N., Sergeev, N. N., et al., (2016), Modern problems of science and education [Sovremennye problemy nauki i obrazovaniya], TulGU, Tula, 202 p.

16. Sergeev, N. N., Gvozdev, A. E., Sergeev, A. N., et al., (2016), Operational materials [Ekspluatacionnye materialy], TulGU, Tula, 160 p.

17. Gvozdev, A. E, Starikov, N. E., Zolotukhin, V. I., et al., (2016), Technology of constructional and operational materials [Tekhnologiya konstrukcionnyh i ekspluatacionnyh materialov], TulGU, Tula, 351 p.

18. Dorokhin, Yu. S., Sergeev, A. N., Dorokhina, K. S., Sergeev, N. N., et al., (2016), Organization and planning of activity of service enterprises [Organizaciya i planirovanie deyatel’nosti predpriyatij servisa], TulGU, Tula, 380 p.

19. Makarov, E. S., Ulchenkova, V. E., Gvozdev, A. E., Sergeev, N. N. and Sergeev, A. N. et al., (2016), Conjugate fields in elastic, plastic, bulk media and metal hard-to-deform systems [Sopryazhennye polya v uprugih, plasticheskih, sypuchih sredah i metallicheskih trudnodeformiruemyh sistemah], TulGU, Tula, 526 p.

20. Sergeev, N. N., Breki, A.D., Didenko, A. L., et al., (2016), Composite coatings based on polyimide A-1 and WS2 nanoparticles with increased tribotechnical characteristics under dry sliding friction [Kompozicionnye pokrytiya na osnove poliimida A-OOO i nanochastic WS2 s povyshennymi tribotekhnicheskimi harakteristikami v usloviyah suhogo treniya skol’zheniya], Materials Science, No. 5, pp. 41-44.

21. Breki, A. D., Gvozdev, A. E., Sergeev, N. N., et al., (2016), On the frictional interaction of metal materials taking into account the phenomenon of superplasticity [O frikcionnom vzaimodejstvii metallicheskih materialov s uchetom yavleniya sverhplastichnosti], Materials Science, No. 8, pp. 21-25.

22. Gvozdev, A. E., Sergeev, N. N., Minaev, I. V., et al., (2016), Temperature distribution and structure in the zone of thermal influence for steel sheets after laser cutting [Raspredelenie temperatur i struktura v zone termicheskogo vliyaniya dlya stal’nyh listov posle lazernoj rezki], Materials Science, No.9, pp. 3-7.

23. Zhuravlev, G. M., Gvozdev, A. E., Sergeev, N. N. and Provotorov, D. A., et al., (2016), Variant of calculation of maximum hardening of low-carbon steels in plastic deformation processes [Variant rascheta maksimal’nogo uprochneniya malouglerodistyh stalej v processah plasticheskoj deformacii], Proizvodstvo prokata, No. 7, pp. 9-13.

24. Gvozdev, A. E., Zhuravlev, G. M., Kolmakov, A. G., Provotorov, D. A. and Sergeev, N. N., et al., (2016), Calculation of deformation damage in the processes of reverse extrusion of metal products [Raschet deformacionnoj povrezhdaemosti v processah obratnogo vydavlivaniya metallicheskih izdelij], Technology of metals, No. 1, pp. 23-32.

25. Medvedeva, V. V., Breki, A. D., Krylov, N. A., et al., (2016), Tribotechnical properties of plastic lubricating composite materials with fillers of dispersed particles of copper and zinc [Tribotekhnicheskie svojstva plastichnyh smazochnyh kompozicionnyh materialov s napolnitelyami iz dispersnyh chastic medi i cinka], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 65, No. 2, pp. 109-119.

26. Breki, A. D., Didenko, A. L., Kudryavtsev, V. V., et al., (2016), Tribotechnical characteristics of composite coatings with a matrix of polyheteroarylene PM-DADFE and fillers of tungsten dichalcogenide nanoparticles under sliding friction in the medium of liquid lubricant [Tribotekhnicheskie harakteristiki kompozicionnyh pokrytij s matricej iz poligeteroarilena PMDADFE i napolnitelyami iz nanochastic dihal’kogenidov vol’frama pri trenii skol’zheniya v srede zhidkogo smazochnogo materiala], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 66, No. 3, pp. 17-28.

27. Zhuravlev, G. M., Gvozdev, A. E., Provotorov, D. A., et al., (2016), Influence of inhomogeneity of mechanical properties on force parameters of plastic shaping [Vliyanie neodnorodnosti mekhanicheskih svojstv na silovye parametry plasticheskogo formoizmeneniya], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 66, No. 3, pp. 52-60.

28. Zhuravlev, G. M., Sergeev, N. N., Gvozdev, A. E., et al., (2016), Physico-mechanical approach to the analysis of drawing processes with thinning of cylindrical products with the prediction of deformation damage of the material [Fiziko-mekhanicheskij podhod k analizu processov vytyazhki s utoneniem cilindricheskih izdelij s prognozirovaniem deformacionnoj povrezhdaemosti materiala], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 67, No. 4, pp. 39-56.

29. Breki, A. D., Vasilyeva, E. S., Tolochko, O. V., et al., (2016), Synthesis and tribotechnical properties of composite coatings with PM–DADPE polyimide matrix and fillers of tungsten dichalcogenide nanoparticles upon dry sliding friction, Inorganic Materials: Applied Research, vol. 7, No. 4, pp. 542-546.

30. Breki, A.D., Koltsova, T. S., Skvortsova, A. N., et al., (2016), Antifriction properties of composite materials based on aluminum, reinforced with carbon nanofibers, at friction on steel 12H [Antifrikcionnye svojstva kompozicionnyh materialov na osnove alyuminiya, uprochnyonnyh uglerodnymi nanovoloknami, pri trenii po stali 12H], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 21, No. 4, pp. 11-23.

31. Zhuravlev, G. M., Sergeyev, A. N., Gvozdev, A. E., Sergeyev, N. N., et al., (2016), To the effective properties estimation of materials, IEJME: Mathematics Education, vol. 11, No. 6, pp. 1481-1493.

32. Medvedeva, V. V., Breki, A. D., Krylov, N. A., et al., (2016), Anti-wear properties of a greasebased composite material containing a mixture of magnesium hydrosilicates [Protivoiznosnye svojstva konsistentnogo smazochnogo kompozicionnogo materiala, soderzhashchego smes’ gidrosilikatov magniya], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 19, No. 2, pp. 30-40.

33. Sergeev, N. N., Gvozdev, A. E., Starikov, N. E. et al., (2017), Technology of metals and alloys [Tekhnologiya metallov i splavov], TulGU, Tula, 490 p.

34. Sergeev, N. N., Gvozdev, A. E., Zelenko, V. K. et al., (2017), Materials science [Materialovedenie], TulGU, Tula, 469 p.

35. Sergeev, N. N., Gvozdev, A. E., Kuzovleva, O. V., et al., (2017), Atlas of microstructures of nonmetallic and metallic materials [Atlas mikrostruktur nemetallicheskih i metallicheskih materialov], TulGU, Tula, 96 p.

36. Sergeev, N. N., Sergeev, A. N., Provotorov, D. A., et al., (2017), Sample for determination of adhesive strength of coatings [Obrazec dlya opredeleniya adgezionnoj prochnosti pokrytij]: patent No. 170385 Russian Federation; applicant and patentee A.E. Gvozdev, 6 p.

37. Chukanov, A. N., Sergeev, N. N., Gvozdev, A. E., et al., (2017), Condensed matter physics: Point defects of crystal structure in the formation of material properties [Fizika kondensirovannogo sostoyaniya: Tochechnye defekty kristallicheskogo stroeniya v formirovanii svojstv materialov], TulGU, Tula, 104 p.

38. Chukanov, A. N., Sergeev, N. N., Gvozdev, A. E., et al., (2017), Condensed matter physics: Linear defects of crystal structure in the formation of material properties [Fizika kondensirovannogo sostoyaniya: Linejnye defekty kristallicheskogo stroeniya v formirovanii svojstv materialov], TulGU, Tula, 154 p.

39. Chukanov, A. N., Sergeev, N. N., Gvozdev, A. E., et al., (2017), Condensed matter physics: Surface and bulk defects of crystal structure in the formation of material properties [Fizika kondensirovannogo sostoyaniya: Poverhnostnye i ob"emnye defekty kristallicheskogo stroeniya v formirovanii svojstv materialov], TulGU, Tula, 156 p.

40. Chukanov, A. N., Sergeev, N. N., Gvozdev, A. E., et al., (2017), Condensed matter physics: structural Defects and the creation of theories of hardening of materials [Fizika kondensirovannogo sostoyaniya: Defekty stroeniya i sozdanie teorij uprochneniya materialov], TulGU, Tula, 298 p.

41. Sergeev, A. N., Sergeev, N. N., Gvozdev, A. E., et al., (2017), Laboratory workshop on the course “Processing of structural materials” [Laboratornyj praktikum po kursu .Obrabotka konstrukcionnyh materialov.], TulGU, Tula, 146 p.

42. Sergeev, A. N., Sergeev, N. N., Medvedev, P. N., et al., (2017), Final qualifying work of studentsundergraduates of the direction of preparation 44.04.01 Pedagogical education (orientation (profile) “Technology”) (master’s level) [Vypusknaya kvalifikacionnaya rabota studentov-magistrantov napravleniya podgotovki 44.04.01 Pedagogicheskoe obrazovanie (napravlennost’ (profil’) .Tekhnologiya.) (uroven’ magistratury)], TulGU, Tula, 196 p.

43. Gvozdev, A. E., Sergeev, N. N., Minaev, I. V., et al., (2017), Complex approach to modeling of resource-saving processes of processing and frictional interaction of metal systems [Kompleksnyj podhod k modelirovaniyu resursosberegayushchih processov obrabotki i frikcionnogo vzaimodejstviya metallicheskih sistem], TulGU, Tula, 232 p.

44. Sergeev, A. N., Sergeev, N. N., Shaidenko, N. A., et al., (2017), Final qualifying work of the bachelor of pedagogical education: studies.-method. the manual for preparation for the state final certification in the direction of preparation 44.03.05 Pedagogical education (with two profiles of preparation), profiles “Technology” and “Economy” [Vypusknaya kvalifikacionnaya rabota bakalavra pedagogicheskogo obrazovaniya: ucheb.-metod. posobie dlya podgotovki k Gosudarstvennoj itogovoj attestacii po napravleniyu podgotovki 44.03.05 Pedagogicheskoe obrazovanie (s dvumya profilyami podgotovki), profili .Tekhnologiya. i .Ekonomika.], TulGU, Tula, 240 p.

45. Sergeev, A. N., Sergeev, N. N., Gvozdev, A. E. et al., (2017), Processing of structural materials [Obrabotka konstrukcionnyh materialov], TulGU, Tula, 276 p.

46. Sergeev, N. N., Minaev, I. V., Tikhonova, I. V. et al., (2017), Influence of chemical composition of sheet metal and laser processing parameters on quality indicators [Vliyanie himicheskogo sostava listovogo prokata i parametrov lazernoj obrabotki na pokazateli kachestva], VII International conference “Deformation and destruction of materials and nanomaterials”, IMET RAN, Moscow, pp. 208-209.

47. Sergeev, N. N., Tikhonova, I. V., Gvozdev, A. E., et al., (2017), Dependence of surface quality indicators on laser and gas-plasma treatment of carbon steel sheet products [Zavisimost’ pokazatelej kachestva poverhnosti ot rezhimov lazernoj i gazoplazmennoj obrabotki listovogo prokata iz uglerodistyh stalej], VII International conference “Deformation and destruction of materials and nanomaterials”, IMET RAN, Moscow, p. 210.

48. Sergeev, N. N., Gvozdev, A. E. and Kutepov, S. N., (2017), Change of characteristics of strength and plasticity of powder metal system iron-carbon-tungsten-molybdenum-chromium-vanadium at thermomechanical tension [Izmenenie harakteristik prochnosti i plastichnosti poroshkovoj metallicheskoj sistemy zhelezo-uglerod-vol’fram-molibden-hrom-vanadij pri termomekhanicheskom rastyazhenii], VII International conference “Deformation and destruction of materials and nanomaterials”, IMET RAN, Moscow, pp. 574-575.

49. Sergeev, N. N., Tereshin, V. A., Chukanov, A. N., et al., (2017), Formation of plastic zones near a spherical cavity in hardened low-carbon steels under conditions of hydrogen stress corrosion [Formirovanie plasticheskih zon okolo sfericheskoj polosti v uprochnennyh nizkouglerodistyh stalyah v usloviyah vodorodnoj stress-korrozii], Materials Science, No. 12, pp. 18-25.

50. Breki, A. D., Medvedeva, V. V., Krylov, N. A., et al., (2017), Anti-wear properties of plastic lubricating composite materials “LITHOLITE-particles of magnesium hydrosilicates” [Protivoiznosnye svojstva plastichnyh smazochnyh kompozicionnyh materialov .LITOL24-chasticy gidrosilikatov magniya.], Materials Science, No. 3, pp. 38-42.

51. Baranov, V. P., Gvozdev, A. E., Kolmakov, A. G., Sergeev, N. N. and Chukanov, A. N., (2017), Multilevel approach to the problem of delayed destruction of high-strength structural steels under the action of hydrogen [Mnogourovnevyj podhod k probleme zamedlennogo razrusheniya vysokoprochnyh konstrukcionnyh stalej pod dejstviem vodoroda], Materials Science, No. 7, pp. 11-22.

52. Zhuravlev, G. M., Gvozdev, A. E., Cheglov, A. E., Sergeev, N. N. and Gubanov, O. M., (2017), Variant of determination of maximum plastic hardening in tool steels [Variant opredeleniya maksimal’nogo plasticheskogo uprochneniya v instrumental’nyh stalyah], Steel, No. 6, pp. 26-39.

53. Zhuravlev, G. M., Gvozdev, A. E., Cheglov, A. E., Sergeev, N. N. and Gubanov, O. M. (2017), Maximum plastic strengthening in tool steels, Steel in Translation, vol. 47, No. 6, pp. 399-411.

54. Sergeev, N. N., Kutepov, S. N., Gvozdev, A. E. and Ageev, E. V., (2017), Mechanisms of hydrogen cracking of metals and alloys associated with increased dislocation activity [Mekhanizmy vodorodnogo rastreskivaniya metallov i splavov, svyazannye s usileniem dislokacionnoj aktivnosti], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 21, No. 2(71), pp. 32-47.

55. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2017), Analysis of theoretical ideas about the mechanisms of hydrogen cracking of metals and alloys [Analiz teoreticheskih predstavlenij o mekhanizmah vodorodnogo rastreskivaniya metallov i splavov], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 21, No. 3(72), pp. 6-33.

56. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2017), Diffusion of hydrogen in welded joints of structural steels [Diffuziya vodoroda v svarnyh soedineniyah konstrukcionnyh stalej], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 21, No. 6(75), pp. 85-95.

57. Breki, A. D., Gvozdev, A. E., Kolmakov, A. G., et al., (2017), On friction of metallic materials with consideration for superplasticity phenomenon, Inorganic Materials: Applied Research, vol. 8, No. 1, pp. 126-129.

58. Gvozdev, A. E., Sergeyev, N. N., Minayev, I. V., et al., (2017), Temperature distribution and structure in the heat-affected zone for steel sheets after laser cutting, Inorganic Materials: Applied Research, vol. 8, No. 1, pp. 148-152.

59. Breki, A. D., Didenko, A. L., Kudryavtsev, V. V., et al., (2017), Composite coatings based on A-OOO polyimide and WS2 nanoparticles with enhanced dry sliding characteristics, Inorganic Materials: Applied Research, vol. 8, No. 1, pp. 56-59.

60. Sergeev, N. N., Gvozdev, A. E., Sergeev, A. N., et al., (2017), Promising steels for blast furnace casings [Perspektivnye stali dlya kozhuhov domennyh agregatov], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 7, No. 2(23), pp. 6-15.

61. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2017), Influence of heat treatment regimes on the resistance of high-strength reinforcing steel to hydrogen cracking [Vliyanie rezhimov termicheskoj obrabotki na stojkost’ vysokoprochnoj armaturnoj stali k vodorodnomu rastreskivaniyu], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 7, No. 4 (25), pp. 6-20.

62. Sergeev, N. N., Sergeev, A. N., (2017), Hydrogen embrittlement and cracking of high-strength reinforcing steel [Vodorodnoe ohrupchivanie i rastreskivanie vysokoprochnoj armaturnoj stali], TulGU, Tula, 180 p.

63. Gvozdev, A. E., Sergeev, N. N., Sergeev, A. N., et al., (2018), Anomalous mechanical properties of some metallic systems [Anomal’nye mekhanicheskie svojstva nekotoryh metallicheskih sistem], TulGU, Tula, 149 p.

64. Gvozdev, A. E., Starikov, N. E., Sergeev, N. N., et al., (2018), The technology of construction, maintenance and operation of tool materials [Tekhnologiya konstrukcionnyh, ekspluatacionnyh i instrumental’nyh materialov], TulGU, Tula, 406 p.

65. Gvozdev, A. E., Starikov, N. E., Sergeev, N. N., et al., (2018), Fundamentals of resource-saving processes for the production of high-speed tool [Osnovy resursosberegayushchih processov polucheniya bystrorezhushchego instrumenta], TulGU, Tula, 209 p.

66. Sergeev, N. N., Minaev, I. V., Tikhonova, I. V., et al., (2018), Fundamentals of laser and gas-plasma treatment of structural steels [Osnovy lazernoj i gazoplazmennoj obrabotki konstrukcionnyh stalej], TulGU, Tula, 283 p.

67. Breki, A. D., Medvedeva, V. V., Krylov, N. A., et al., (2018), Antiwear properties of composite greases “LITOL-24 – magnesium hydrosilicate particles”, Inorganic Materials: Applied Research, vol. 9, No. 1, pp. 21-25.

68. Breki, A. D., Gvozdev, A. E., Kolmakov, A. G. and Sergeev, N. N., (2018), The study of the friction of steel spinning SHX15 on steels R6M5 and 10R6M5-MP using mathematical modeling [Issledovanie treniya vercheniya stali SHKH15 po stalyam R6M5 I 10R6M5-MP s ispol’zovaniem matematicheskogo modelirovaniya], Materials Science, No. 12, pp. 40-45.

69. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Mechanisms of hydrogen cracking of metals and alloys. Part I (review) [Mekhanizmy vodorodnogo rastreskivaniya metallov i splavov. CH. I (obzor)], Materials Science, No. 3, pp. 27-33.

70. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Mechanisms of hydrogen cracking of metals and alloys. Part II (review) [Mekhanizmy vodorodnogo rastreskivaniya metallov i splavov. CH. II (obzor)], Materials Science, No. 4, pp. 20-29.

71. Sergeev, N. N., Minaev, I. V., Gvozdev, A. E., et al., (2018), Influence of carbon content and laser cutting parameters on the structure and extent of the zone of thermal influence of steel [Vliyanie soderzhaniya ugleroda i parametrov lazernoj rezki na stroenie i protyazhennost’ zony termicheskogo vliyaniya stal’nyh listov], Steel, No. 5, pp. 21-26.

72. Sergeev, N. N., Minaev, I. V., Gvozdev, A. E., et al., (2018), Decarburization and the influence of laser cutting on steel structure, Steel in Translation, vol. 48, No. 5, pp. 313-319.

73. Makarov, E. S., Cheglov, A. E., Gvozdev, A. E., et al., (2018), Some problems of calculation of power of plastic deformation of powder metal systems [Nekotorye zadachi rascheta moshchnosti plasticheskoj deformacii poroshkovyh metallicheskih sistem], Steel, No. 9, pp. 23-27.

74. Makarov, E. S., Gvozdev, A. E., Zhuravlev, G. M., et al., (2018), Conception of a plastic gas and model medium for dilatable isotropic materials, Physics and Chemistry of Materials Processing, No. 4, pp. 57-64.

75. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), The use of hydrogen traps to control the process of hydrogen cracking of welded joints of high-strength steels [Ispol’zovanie vodorodnyh lovushek dlya kontrolya processa vodorodnogo rastreskivaniya svarnyh soedinenij vysokoprochnyh stalej], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 4, pp. 344-356.

76. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Effect of tempering temperature on long-term strength of reinforcing steels in hydrogen-containing media [Vliyanie temperatury otpuska na dlitel’nuyu prochnost’ armaturnyh stalej v vodorodsoderzhashchih sredah], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 6, pp. 514-525.

77. Sergeev, N. N., Sergeev, A. N., Gvozdev, A. E., et al., (2018), Research of influence of alloying on mechanical and corrosion properties of reinforcing rolled products [Issledovanie vliyaniya legirovaniya na mekhanicheskie i korrozionnye svojstva armaturnogo prokata], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 7, pp. 117-131.

78. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Investigation of corrosion resistance of intermetallic powder materials [Issledovanie korrozionnoj stojkosti intermetallicheskih poroshkovyh materialov], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 8, pp. 108-121.

79. Sergeev, N. N., Izvolsky, V. V., Sergeev, A. N., et al., (2018), Development of a method of investigation of corrosion-mechanical destruction of reinforcing steels in hydrogen-containing media [Razrabotka metodiki issledovaniya korrozionno-mekhanicheskogo razrusheniya armaturnyh stalej v vodorodosoderzhashchih sredah], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 8, pp. 35-56.

80. Sergeev, N. N., Ushakov, M. V., Sergeev, A. N., et al., (2018), Cohesive strength of metal and intermetallic powder plasma coatings [Kogezionnaya prochnost’ metallicheskih i intermetallicheskih poroshkovyh plazmennyh pokrytij], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 8, pp. 62-79.

81. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Influence of tempering regimes on long-term strength of reinforcing steels in hydrogen-containing media [Vliyanie rezhimov otpuska na dlitel’nuyu prochnost’ armaturnyh stalej v vodorodsoderzhashchih sredah], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 8, pp. 94-107.

82. Sergeev, N. N., Izvolsky, V. V., Sergeev, A. N., et al., (2018), Influence of chemical composition of steel 23X2G2T on resistance against corrosion cracking [Vliyanie himicheskogo sostava stali 23H2G2T na stojkost’ protiv korrozionnogo rastreskivaniya], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 9, pp. 409-420.

83. Sergeev, N. N., Izvolsky, V. V., Sergeev, A. N., et al., (2018), Influence of tempering conditions on mechanical and corrosion properties of steel 23X2G2T [Vliyanie uslovij otpuska na mekhanicheskie i korrozionnye svojstva stali 23H2G2T], Vestnik Rybinskoj gosudarstvennoj aviacionnoj tekhnologicheskoj akademii im. P. A. Soloveva, vol. 45, No. 2, pp. 128-135.

84. Sergeev, N. N., Izvolsky, V. V., Sergeev, A. N., et al., (2018), Influence of microstructural factors and heat treatment on corrosion resistance of reinforcing steel class A600 [Vliyanie mikrostrukturnyh faktorov i termicheskoj obrabotki na korrozionnuyu stojkost’ armaturnoj stali klassa A600], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 22, No. 2(77), pp. 52-63.

85. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Application of manufacturing technology "cortical" method of forming inserts for injection molding of copper alloys [Primenenie tekhnologii izgotovleniya .korkovym. sposobom formoobrazuyushchih vstavok dlya lit’ya pod davleniem mednyh splavov], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta, vol. 22, No. 3(78), pp. 67-83.

86. Sergeev, N. N., Tereshin, V. A., Sergeev, A. N., et al., (2018), Formation of plastic zones near spherical cavity in hardened low-carbon steels under conditions of hydrogen stress corrosion, Inorganic Materials: Applied Research, vol. 9, No. 4, pp. 663-669.

87. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Kinetics of crack propagation in metal materials at corrosion-mechanical destruction [Kinetika rasprostraneniya treshchin v metallicheskih materialah pri korrozionno-mekhanicheskom razrushenii], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 8, No. 1 (26), pp. 24-37.

88. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Research of comparative resistance of reinforcing steels in the process of accelerated laboratory tests for hydrogen cracking [Issledovanie sravnitel’noj stojkosti armaturnyh stalej v processe uskorennyh laboratornyh ispytanij na vodorodnoe rastreskivanie], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 8, No. 1 (26), pp. 38-48.

89. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2018), Effect of tempering temperature on the resistance of reinforcing steel 20GX2 against hydrogen cracking [Vliyanie temperatury otpuska na stojkost’ armaturnoj stali 20GS2 protiv vodorodnogo rastreskivaniya], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 8, No. 2 (27), pp. 54-67.

90. Sergeev, N. N., Sergeev, A. N., Gvozdev, A. E., et al., (2018), Influence of the level of tensile stresses on the long-term strength of reinforcing steels in hydrogen-containing media [Vliyanie urovnya rastyagivayushchih napryazhenij na dlitel’nuyu prochnost’ armaturnyh stalej v vodorodsoderzhashchih sredah], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 8, No. 2 (27), pp. 6-19.

91. Sergeev, N. N., Sergeev, A. N., (2018), Mechanical properties and internal friction of high-strength steels in corrosive environments [Mekhanicheskie svojstva i vnutrennee trenie vysokoprochnyh stalej v korrozionnyh sredah], TulGU, Tula, 430 p.

92. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2019), Bases of increase of durability of the high-strength steels operated in hydrogen-containing environments [Osnovy povysheniya dolgovechnosti vysokoprochnyh stalej, ekspluatiruemyh v vodorodsoderzhashchih sredah], TulGU, Tula, 348 p.

93. Starikov, N. E., Gvozdev, A. E., Kutepov, S. N., Sergeev, N. N., et al., (2019), Special conditions of metal systems and resource-saving technologies of pressure treatment of composite materials, alloys of non-ferrous metals, ingot and powder steels [Osobye sostoyaniya metallicheskih sistem i resursosberegayushchie tekhnologii processov obrabotki davleniem kompozicionnyh materialov, splavov cvetnyh metallov, slitkovyh i poroshkovyh stalej], RVVDKU, Ryazan, 194 p.

94. Sergeev, N. N., Izvolsky, V. V., Sergeev A. N., et al., (2019), Influence of internal and external factors on kinetics of process of corrosion-mechanical destruction of reinforcing steels [Vliyanie vnutrennih i vneshnih faktorov na kinetiku processa korrozionno-mekhanicheskogo razrusheniya armaturnyh stalej], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 2, pp. 410-429.

95. Sergeev, N. N., Ushakov, M. V., Sergeev A. N., et al., (2019), Influence of reflow process on cohesive strength of powder plasma coatings [Vliyanie processa oplavleniya na kogezionnuyu prochnost’ poroshkovyh plazmennyh pokrytij], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 2, pp. 430-441.

96. Sergeev, N. N., Sergeev, A. N., Kutepov, S. N., et al., (2019), Influence of temperature of the beginning of martensitic transformation on character of hydrogen cracking of welded joints [Vliyanie temperatury nachala martensitnogo prevrashcheniya na harakter vodorodnogo rastreskivaniya svarnyh soedinenij], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 3, pp. 523-528.

97. Sergeev, N. N., Izvolsky, V. V., Sergeev A. N., et al., (2019), Influence of technological regimes of reinforcement reinforcement for composite reinforced concrete structures on the sensitivity to corrosion and mechanical destruction [Vliyanie tekhnologicheskih rezhimov uprochneniya armaturnogo prokata dlya kompozicionnyh zhelezobetonnyh konstrukcij na chuvstvitel’nost’ k korrozionno-mekhanicheskomu razrusheniyu], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 3, pp. 558-568.

98. Sergeev, N. N., Ushakov, M. V., Sergeev, A. N., et al., (2019), Investigation of corrosion resistance of structural alloy steels in aggressive environments [Issledovanie korrozionnoj stojkosti konstrukcionnyh legirovannyh stalej v agressivnyh sredah], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 3, pp. 591-601.

99. Sergeev, N. N., Ushakov, M. V., Sergeev, A. N., et al., (2019), Research of influence of mechanical processing on corrosion resistance of intermetallic coverings [Issledovanie vliyaniya mekhanicheskoj obrabotki na korrozionnuyu stojkost’ intermetallicheskih pokrytij], Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki, No. 3, pp. 601-614.

100. Sergeev, N. N., Izvolsky, V. V., Sergeev A. N., et al., (2019), Influence of complex alloying on physico-mechanical and corrosion properties of low-alloy steel 09G2 [Vliyanie kompleksnogo legirovaniya na fiziko-mekhanicheskie i korrozionnye svojstva nizkolegirovannoj stali 09G2], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 9, No. 1 (30), pp. 6-18.

101. Sergeev, N. N., Tikhonova, I. V., Sergeev, A. N., et al., (2019), Influence of charge quality on sensitivity of 30HGCA steel to hydrogen cracking [Vliyanie kachestva shihty na chuvstvitel’nost’ stali 30HGSA k vodorodnomu rastreskivaniyu], Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, vol. 9, No. 1 (30), pp. 37-48.

102. Gadalov, V. N., Gvozdev, A. E., Zolotukhin, V. I., et al., (2019), Minas Khachaturovich Shorshorov, outstanding scientist, teacher, teacher (1922-2005) [Minas Hachaturovich Shorshorov, vydayushchijsya uchenyj, pedagog, uchitel’ (1922-2005)], Vestnik Rybinskoj gosudarstvennoj aviacionnoj tekhnologicheskoj akademii im. P. A. Soloveva, No. 3 (26), pp. 3-7.


Review

For citations:


Sergeev A.N., Gvozdev A.E., Ushakov M.V., Medvedev P.N., Dorokhin Yu.S., Kutepov S.N., Maliy D.V. Nikolay Nikolaevich Sergeev, Doctor of Technical Sciences, Professor of Tula State Lev Tolstoy Pedagogical University — bright representative of the scientific school of physical fundamental and applied materials science M. A. Krishtal. Chebyshevskii Sbornik. 2019;20(3):533-558. (In Russ.) https://doi.org/10.22405/2226-8383-2019-20-3-533-558

Views: 639


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2226-8383 (Print)