The story of the creation method of assessing damage of steels on the basis of mechanical spectroscopy
https://doi.org/10.22405/2226-8383-2019-20-3-514-532
Abstract
Against the background of the formation and development of one of the promising methods of physical materials science – mechanical spectroscopy - the history of the discovery of Tula metal physicists N.N. Sergeev and V.S. Ageev previously unknown effect of inelastic behavior of steels. Their first attempt of theoretical description of the mechanism of its formation is described. Set out the further fate of the detected effect in the interplay with the lives of its researchers. The history of the renovation of the forgotten for almost 30 years of discovery is proposed. A multi-faceted program of large-scale study of the mechanism of undeservedly forgotten effect, implemented in decades by the followers of the pioneers, is presented in detail. Disputes with skeptics are described. The main alternative ideas as the reasons of scientific disputes around the nature of effect are stated. Answers to critical questions are given, which allowed the authors to convince skeptics of the reality of the discovered phenomenon and to create a new direction in the study of steels and alloys – a method of assessing their damage by the results of mechanical spectroscopy. The examples of industrial application of the created direction are described. The areas of application of the method of application of the complex of inelastic effects developed by the authors on the basis of the revived method for a multiscale description of structural changes in steels and alloys in the course of external destructive effects of different nature are listed. New ways of development and improvement of the method proposed by the authors in the study of products obtained both by standard ingot technology and in the conditions of additive 3D printing technologies are described.
About the Authors
Alexander Nikolaevich ChukanovRussian Federation
Aleksander Evgenievich Gvozdev
Russian Federation
Aleksander Nikolaevich Sergeev
Russian Federation
Aleksandra Aleksandrovna Yakovenko
Russian Federation
Pavel Nikolaevich Medvedev
Russian Federation
Sergey Nikolaevich Kutepov
Russian Federation
Dmitry Vladimirovich Maliy
Russian Federation
References
1. The method of internal friction in physical metallurgy research, ed. by M.S. Blanter, Y.V. Piguzov.- M: Metallurgy, 1991. 248 p.
2. Chukanov A.N. Condensed matter physics. Point defects of crystal structure in the formation of material properties: studies. manual // A.N. Chukanov, N. N. Sergeev, A. E. Gvozdev, A. N. Sergeev, P. N. Medvedev, Y. S. Dorokhin, S. N. Kutepov, A. A. Yakovenko, D. V. Mali. - Tula: Publishing House of TulGU, 2017. 104 p.
3. Chukanov A.N. Condensed matter physics. Linear defects of crystal structure in the formation of material properties: studies. manual / A.N. Chukanov, N.N. Sergeev, A.E. Gvozdev, A.N. Sergeev, P.N. Medvedev, Y.S. Dorokhin, S.N. Kutepov, A.A. Yakovenko, D.V. Mali. - Tula: Publishing House of TulGU, 2017. 154 p.
4. Chukanov A.N. Condensed matter physics. Surface and volume defects of the crystal structure in the formation of material properties: studies. manual // A.N. Chukanov, N.N. Sergeev, A.E. Gvozdev, A.N. Sergeev, P.N. Medvedev, Y.S. Dorokhin, S.N. Kutepov, A.A. Yakovenko, D.V. Mali. - Tula: Publishing House of TulGU, 2017. 156 p.
5. Chukanov A.N. Condensed matter physics. Defects of structure and creation of theories of hardening of materials: studies. manual // A.N. Chukanov, N.N. Sergeev, A.E. Gvozdev, A.N. Sergeev, P.N. Medvedev, Y.S. Dorokhin, S.N. Kutepov, A. A. Yakovenko, D. V. Mali. - Tula: Publishing House of TulGU, 2017. 298 p.
6. Ageev V.S., Postnikov V.A., Sergeev N.N. Internal friction in high-strength reinforcing steels subjected to tests for relaxation resistance and long-term strength in corrosive environments // Problems of metallurgy and physics of metals. – Tula: TPI, 1974. Issue. 3. Pp. 73-80.
7. Sergeev N.N., Izvolskiy V.V., Ageev V.S. the Influence of the tempering temperature of the mechanical properties and resistance to cracking in aggressive environments of reinforcing steel 20GS2 // Problems of metallurgy and physics of metals. - Tula. TPI. 1974. Issue. 3. Pp. 103-107.
8. Ageev V.S., Sergeev N.N., Petrushin G.D. the Mechanism of vibration energy scattering due to the mobility of microcracks in solids // Internal friction in metals, semiconductors, dielectrics and ferromagnets. – M.: Science, 1978. Pp. 97-102.
9. Chukanov A.N. Accuracy of determination of the module of normal elasticity // Problems of quality and efficiency of use of metal in mechanical engineering TPI-Tula. 1982. P. 169 – 172.
10. Chukanov A. N. Complex study of micro-deformation characteristics, internal friction and shear modulus at torsion // Interaction of crystal lattice defects and properties of Tula metals. -TPI. 1983. P. 132-135.
11. Chukanov A.N. Improvement of equipment for measuring low-frequency internal friction lattice Defects and alloys with specific properties. - Tula, TPI. 1994. P. 177-182.
12. The patent of the Russian Federation. № 1067406. Torsional pendulum for determination of mechanical properties of materials // Chukanov A.N., Golovin S.A., Levin D.M., Yurkin I.N. // Byul. Fig., 1993. № 7.
13. The patent of the Russian Federation. № 1756803. Method for determining the upper limit of the elastic hysteresis of the material // Chukanov A.N., Levin D.M., Golovin S.A., Chukanov I.V. // Byul. Fig., 1993. № 3.
14. Chukanov A.N., Yakovenko A.A., Honelidze D.M. Hardening reduction treatment rolled carbon steels // Izvestiya TulGU. Series: Technical Sciences. 2015. Issue. 5-2. P. 240 - 251.
15. The patent of the Russian Federation. № 1794096. The method of hardening metal products // Chukanov A.N., Levin D.M. // Bulletin SB Rams. Fig., 1993. № 5.
16. Chukanov A.N., Golovin S.A., Levin D.M. Analysis of microplasticity curves in copperaluminum alloys // Heat treatment and properties of metals - Sverdlovsk. -UPI. - 1985. P. 93-98.
17. Chukanov A.N., Levin D.M., Kanunnikova I.Y. Development of microplasticity in copperaluminum alloys // Diffusion processes in metals Tula - TPI. 1986. P. 139-145.
18. Chukanov A. N., Levin D. M., Kanunnikova I.Yu. Features of the process of microplastic deformation in solid solutions of substitution // Interaction of lattice defects and properties of metals and alloys – Tula: TPI, 1986. Pp. 21 - 27.
19. Chukanov A.N., Ganopolskaiy N.E. Features microdeformations curve of single-phase alloys of substitution // Dislocation structure in metals and alloys and methods of its study / Tula. -TPI. 1987. Pp. 104-107.
20. Levin D.M., Chukanov A.N. Defect packaging and solid solution hardening in single-phase alloys of copper and Nickel // The Role of lattice defects in the structure formation of alloys of Tula, -TPI. 1989. P. 69-73.
21. Chukanov A.N., Levin D.M. On concentration dependence of microdeformation characteristics of solid solutions of Cu - Al and Ni - Al // Internal friction and dislocation structure of metals - Tula, - TPI. 1990. P. 88-93.
22. Chukanov A.N. Analysis of the mechanisms of solid-solution hardening in single-phase alloys of copper-aluminum and Nickel-aluminum // Influence of dislocation structure on the properties of metals and alloys. -Tula. – TPI. 1991. P. 35-40.
23. Chukanov A.N. Mobility of dislocations in single-phase alloys of aluminum-magnesium system // Defects of crystal lattice and properties of metals and alloys -Tula, - TPI, 1992. P. 99-104.
24. Chukanov A.N. Physical and mechanical regularities of formation of limit state and development of local fracture in metal materials // Diss. on competition of a scientific degree. academic step. doctor. Techn. sciences. - Tula: TulGU, 2001. 387 p.
25. Chukanov A.N. Low-temperature internal friction in micro-alloyed aluminium // Proceedings of the Russian Academy of Sciences. Series physical. 1993. Vol. 57. № 11. P. 90-93.
26. Chukanov A.N., Levin D.M., Muravleva L.V. Internal friction as a measure of local damage of metallic materials // Bulletin of the Russian Academy of Sciences: Physics. 2000. Vol. 64. № 9. P. 1714 - 1717.
27. Levin D.M., Chukanov A.N. Effect of local stresses induced by structural defects of dislocation cluster dynamics // Bulletin of the Russian Academy of Sciences: Physics. 2005. Vol. 69. № 8. P. 1345-1350.
28. Chukanov A.N., Golovin S.A., Levin D.M., Petrushin G.D. Tables of standard reference data of the CMEA 21-88. - M.: Ed. Standards, 1989. 12 p.
29. Chukanov A.N., Golovin S.A., Levin D.M., Petrushin G.D. GSSSD 58-83. The construction began. Modulus of elasticity at temperatures from -70 to 700 0C - M.: Publishing house of Standards, 1984. 4 P.
30. Chukanov A.N., Golovin S.A., Levin D.M., Petrushin G.D. Tables of standard reference data of the CMEA 21-88 M. Ed. standards. 1989. 12 P.
31. Chukanov A.N., Yakovenko A.A., Honelidze D.M. Hardening reduction treatment rolled carbon steels // Izvestiya TulGU. Series: Technical Sciences. 2015. Issue. 5-2. P. 240 - 251.
32. Chukanov A.N., Levin D.M., Yakovenko A.A. Use and Prospects for the Internal Friction Method in Assessing the Degradation and Destruction of Iron-Carbon Alloys // Bulletin of the Russian Academy of Sciences. Physics. 2011. Vol. 75. № 10. pp. 1340-1344.
33. Chukanov A.N., Gvozdev A.E., Sergeev A.N., Yakovenko A.A., Honelidze D.M. Application of the method of mechanical spectroscopy to study substructures degradation and the initial stages of the destruction of steel // "The XV Intern. Congress of steelmakers and metal producers (ISCON-2018) 15-19.10.18 G., Moscow-Tula, Sat. mater., P. 606 -612.
34. Sergeyev N.N., Tereshin V.A., Chukanov A.N., Kolmakov A.G., Yakovenko A. A., Sergeyev A. N., Leontyev I. M., Khonelidze D. M., Gvozdev A.E. Formation of Plastic Zones near Spherical Cavity in Hardened Low-Carbon Steels under Conditions of Hydrogen Stress Corrosion // Inorganic Materials: Applied Research, 2018 vol. 9, No. 4, pp. 663-669.
35. Chukanov A.N., Yakovenko A.A., Leontiev I.M., Shirokiy I.F. Mechanical spectroscopy of metals. History of origin, development and prospects // "Algebra, number theory and discrete geometry: modern problems and applications". Matera. XV inter. Conf. dedicated. The centenary of the birth. prof.M. Korobov. - Tula: TSPU them. L. N. Tolstoy, 2018. P. 364-366.
36. Chukanov A.N., Gvozdev A.E., Sergeev A.N., Shirokiy I.F., Yakovenko A.A., Leontiev I.M. Ultrasonic diagnostics of cast and powder steels // "Strength of heterogeneous structures" (PROST-2018): IX Eurasian scientific and practical Conf. (Moscow, NUST MISIS, 24-26.04.18): Sat. Tr.– NUST MISIS, 2018. P. 151.
37. Sergeev N.N., Chukanov A.N., Baranov V.P., Yakovenko A.A. Development of Damage and Decarburization of High-Strength Low-Alloy Steels Under Hydrogen Embrittlement // Metal Science and Heat Treatment. 2015. vol. 57. № 1-2. P. 63-68.
Review
For citations:
Chukanov A.N., Gvozdev A.E., Sergeev A.N., Yakovenko A.A., Medvedev P.N., Kutepov S.N., Maliy D.V. The story of the creation method of assessing damage of steels on the basis of mechanical spectroscopy. Chebyshevskii Sbornik. 2019;20(3):514-532. (In Russ.) https://doi.org/10.22405/2226-8383-2019-20-3-514-532
Views:
389
Email this article 