Application of mathematical method of local variations to solve problems of plastic formification of metal, powder and nanocomposition materials

The paper considers an approach to solving plastic forming problems using a variational approach, which allows to determine the stress-strain state and the technological parameters associated with it, taking into account the combination of rheological properties of the materials being processed. On the basis of the first principle of energy in mechanics, which is built on the theorems on extremal properties, when the absolute minimum of the total power of the formchanging process corresponds to a real velocity field, energy functional has been composed. The energy functional is a power balance of internal and external forces. As the power of internal forces, we understand the cost of power of plastic deformation; power associated with the presence of velocities discontinuity surfaces in the volume of a deformable medium; power of friction forces, on the contact boundary with the tool; inertial component of power expended on the change in kinetic energy. Such a formulation makes it possible to investigate the processes of high-speed strain in the same way. This functional characterizes the state of the material under these processing conditions. To solve this functional, the method of local variations is applied, which refers to the direct numerical methods of the calculus of variations. An algorithm for calculating the power of plastic strains for the process of reverse extrusion of a glass from an isotropic, rigid-plastic material is given as an example.

1. Tarnovsky I.Ya., Pozdeev A.A., Ganago O.A., et al. 1963, Teoriya obrabotki metallov davleniem [Theory of metal forming]. Moscow: Metallurgizdat, 672 p.

2. Chernousko F.L., Banichuk N.V. 1973, Variacionnye zadachi mekhaniki upravleniya [Variational problems of control mechanics]. Moscow: Nauka, 238 p.

3. Zhuravlev G.M., Gvozdev A.E. 2016, Obrabotka stalej i splavov v intervale temperatur fazovyh prevrashchenij [Processing of steels and alloys in the temperature range of phase transformations] monograph. Tula: Izd-vo TulGU, 320 p.

4. Zhuravlev G.M., Gvozdev A.E. 2014, Plasticheskaya dilatansiya i deformacionnaya povrezhdaemost metallov i splavov [Plastic dilatancy and deformation damage of metals and alloys] monograph. Tula: Izd-vo TulGU, 114 p.

5. Gvozdev A.E., Zhuravlev G.M., Kolmakov A.G. 2015, "Formirovanie mekhanicheskih svojstv uglerodistyh stalej v processah vytyazhki s utoneniem [Formation of mechanical properties of carbon steels in the processes of drawing with thinning]", Tekhnologiya metallov. No. 11. pp. 17-29.

6. Zhuravlev G. M., Gvozdev A. E., Sergeev N. N., Provotorov D. A. 2015, "Vliyanie deformacionnoj povrezhdaemosti na formirovanie mekhanicheskih svojstv malouglerodistyh stalej [Influence of deformation damage on the formation of mechanical properties of low-carbon steels]", Proizvodstvo prokata. No. 12. pp. 9-13.

7. Tutyshkin N. D., Gvozdev A. E., Tregubov V. I., et al. 2015, Kompleksnye zadachi teorii plastichnosti [Complex problems of plasticity theory] monograph. Tula: Izd-vo TulGU, 408 p.

8. Gvozdev A.E., Zhuravlev G. M., Kolmakov A.G., et al. 2016, Raschet deformacionnoj povrezhdaemosti v processah obratnogo vydavlivaniya metallicheskih izdelij [Calculation of deformation damage in the processes of reverse extrusion of metal products] Tekhnologiya metallov. No. 1. pp. 23-32.

9. Gvishiani A.D. 1973, "Characters of representations of discrete series of groups in SL(2, K), where K is a nondiscrete unconnected locally compact field", Functional Analysis and Its Applications., Vol. 7. No. 1. pp. 16-32.

10. Gvishiani A.D. 1977, "Predstavleniya celochislennoj gruppy SL(2) nad lokalnym nearhimedovym polem v prostranstve funkcij na ploskosti Lobachevskogo [Representations of an integer group SL(2) over a local non-Archimedean field in the function space on the Lobachevsky plane]", Vestnik MGU. Seriya 1. Matematikai mekhanika. No 5. pp. 22-29.

11. Getmanov V.G., Gvishiani A.D., Sidorov R.V. 2015, "Primenenie metoda lokal’nyh approksimacij v zadache snizheniya pogreshnostej sistemy vektornyj-skalyarnyj magnitometr dlya nablyudenij geomagnitnogopolya s magnitnymi buryami [Application of the method of local approximations in the problem of reducing the errors of the vector-scalar magnetometer system for observations of the geomagnetic field with magnetic storms]", Globalnaya ehlektricheskaya cep: Materialy Vtoroj Vserossijskoj konferencii. Geofizicheskaya observatoriya «Borok». Borok: Filigran, 130 p.

12. Makarov E.S., Gvozdev A.E., Zhuravlev G.M. 2015, Teoriya plastichnosti dilatiruyushchih sred [Theory of plasticity gelatinous environments] monograph. Tula: Izd-vo TulGU, 337 p.

13. Makarov E.S., Elenkova E.V., Gvozdev A.E., et al. 2016, Sopryazhennye polya v uprugih, plasticheskih, sypuchih sredah i metallicheskih trudnodeformiruemyh sistemah [Conjugate fields in elastic, plastic, free-flowing media and metallic hard-to-deform systems] monograph. Tula: Izd-vo TulGU, 2016. 526 p.

14. Gvozdev A.E., Breki A.D., Dorokhin Y.S., et al. 2018, "Programmnyj kompleks rascheta moshchnosti sil, poverhnostnogo i frikcionnogo vzaimodejstviya slitkovyh, poroshkovyh i nanokompozicionnyh metallicheskih sistem [Software package for calculating the power of forces, surface and friction interaction of ingot, powder and nanocomposite metal systems]", Svidetel’stvo o gosudarstvennoj registracii programmy dlya EVM №2018661010.

15. Gvozdev A. E., Kolmakov A.G., Malyarov A.V., et al. 2014, "Usloviya proyavleniya nestabil’nosti cementita pri termociklirovanii uglerodistyh stalej [Conditions for the manifestation of instability of cementite during thermal Cycling of carbon steels]", Materialovedenie. No 10. pp. 31-36.

16. Gvozdev A.E., Bogolyubova D.N., Sergeev N.N., et al. 2015, "Features of softening processes of aluminum, copper, and their alloys under hot deformation", Inorganic Materials: Applied Research. Vol. 6. No 1. pp. 32-40.

17. Gvozdev A.E., Kolmakov A.G., Provotorov D.A., et al. 2015, "Zavisimost’ pokazatelej sverhplastichnosti trudnodeformiruemyh stalej R6M5 i 10R6M5-MP ot skhemy napryazhennogo sostoyaniya [The dependence of the parameters of superplastic difficult-to-deform steels R6M5 and 10р6м5-MP from the scheme of the stress state]", Deformaciya i razrushenie materialov. No 11. pp. 42-46.

18. Seledkin E.M., Gvozdev A.E., Sergeev A.N., et al. 2016, Raschet processov obrabotki materialov davleniem metodom konechnyh ehlementov [Calculation of materials processing by pressure by finite element method] monograph. Tula: Izd-vo TulGU, 113 p.

19. Breki A.D., Gvozdev A.E., Kolmakov A.G. 2017, "Application of generalized pascal triangle for description of oscillations of friction forces", Inorganic Materials: Applied Research. Vol. 8. No 4. pp. 509-514. Doi: 10.1134/S2075113317040049.

20. Gvozdev A.E., Sergeyev N.N., Minayev I.V., et al. 2017, "Temperature distribution and structure in the heat-affected zone for steel sheets after laser cutting", Inorganic Materials: Applied Research. Vol. 8. No 1. pp. 148-152. Doi: 10.1134/S2075113317010178.

21. Breki A.D., Gvozdev A.E., Kolmakov A.G., et al. 2017, "On friction of metallic materials with consideration for superplasticity phenomenon", Inorganic Materials: Applied Research. Vol. 8. No 1. pp. 126-129. Doi: 10.1134/S2075113317010087.

22. Makarov E.S., Gvozdev A.E., Zhuravlev G.M., et al. "Primenenie teorii plastichnosti dilatiruyushchih sred k processam uplotneniya poroshkov metallicheskih sistem [Application of the theory of plasticity of dilating media to the processes of compaction of powders of metal systems]", Chebyshevskij sbornik. Vol. 18. No 4(64). pp. 268-284.

23. Gvozdev A.E., Zhuravlev G.M., Sapozhnikov S.V. 2017, "K teoreticheskomu analizu processa kompaktirovaniya poroshkovyh materialov pressovaniem [Theoretical analysis of the process of compacting powder materials by pressing]", Izvestiya Tul’skogo gosudarstvennogo universiteta. Nauki o Zemle. No 4. pp. 273-283.

24. Zhuravlev G.M., Gvozdev A.E., Cheglov A.E. 2017, "Variant opredeleniya maksimal’nogo plasticheskogo uprochneniya v instrumental’nyh stalyah [The alternative definition of maximum plastic work hardening of the steels]", Stal’. No 6. pp. 26-39.

25. Shorshorov M.H., Gvozdev A.E., Sergeyev A. N., et al. 2018, Modelirovanie processov resursosberegayushchej obrabotki slitkovyh, poroshkovyh, nanostrukturnyh i kompozicionnyh materialov [Modeling of processes of resource-saving processing of ingot, powder, nanostructured and composite materials] monograph. Tula: Izd-vo TulGU, 359 p.

26. Breki A. D., Aleksandrov S. E., Tyurikov K. S., et al. 2018, "Antifriction Properties of PlasmaChemical Coatings Based on SiO2 with MoS2 Nanoparticles under Conditions of Spinning Friction on ShKh15 Steel", Inorganic Materials: Applied Research Volume 9, Issue 4, pp. 714718. Doi: 10.1134/S2075113318040081.

27. Shorshorov M.H., Basic A.S., Kazakov M.V., et al. 2018, Sverhplastichnost’ stalej i splavov i resursosberegayushchie tekhnologii processov obrabotki metallov davleniem [Superplasticity of steels and alloys and resource-saving technologies of metal forming processes] monograph. Tula: Izd-vo TulGU, 158 p.