Numeric modeling of forced multistage growth of a hole in elastoplastic solid under superimposed large strains
https://doi.org/10.22405/2226-8383-2024-25-4-228-238
Abstract
The stress-strain state in the vicinity of a cavity formed in a pre-strained body made of elastic-plastic material is calculated for the case of step-by-step cavity growth in several stages.
The problem is solved in a quasi-static formulation for finite strains taking into account their redistribution after each stage of deformation. It is assumed that the transition of material to a plastic state occurs in accordance with the von Mises plasticity condition, and plastic deformation of the material is described by the associated law of plastic flow. The problem is formulated and solved based on the theory of multiple superposition of large strains. A general algorithm for solving the problem within the framework of this theory is presented. The finite element method and the spectral element method are used for the solution. The methods and algorithms implemented in the Fidesys engineering strength analysis system and software modules included in this system were used in the solution. Model calculations are performed for the case of plane deformation of a square body with a central elliptical (at the time of formation) cavity, the growth of which occurs in several stages according to a predetermined law. Graphs of stress distribution in the body are given. The influence of plastic properties of the material and multi-stage deformation on the stress-strain state is investigated.
About the Authors
Vladimir Anatol’evich Levin
doctor of physical and mathematical sciences, professor
Russian Federation
Russian Federation
Lomonosov Moscow State University
Konstantin Moiseevich Zingerman
Tver State University
Russian Federation
Russian Federation
doctor of physical and mathematical sciences, professor
Mikhail Alexandrovich Kartsev
Tula State University
Russian Federation
Russian Federation
postgraduate student
References
1. Levin, V.A., Zingerman, K.M. 2008, “A class of methods and algorithms for the analysis of successive origination of holes in a pre-stressed viscoelastic body. Finite strains”, Communications in Numerical Methods in Engineering. Vol. 24, Issue 12. pp. 2240–2251. doi: 10.1002/cnm.1080.
2. Levin, V.A. 2014, “Nelinejnaya vy‘chislitel‘naya mekhanika prochnosti. T. 1. Modeli i metody. [Nonlinear computational strength mechanics. Vol. 1. Models and methods.]”, (in Russian) Pod obshh. red. V.A. Levina. M.: Fizmatlit, 2014. — 456 s.
3. Levin, V.A., Lokhin, V.V., Zingerman, K.M. 1995, “Growth of a narrow crack formed in a pre-loaded nonlinear-elastic body: Analysis using the theory of repeated superposition of severe strains”, Physics-Doklady. Vol. 40, No. 8. P. 431–433.
4. Levin, V.A., Morozov, E.M. 2007, “Nonlocal criteria for determining a prefracture zone in the process of defect growth for finite strains”, Dokl. Phys. V. 52, No. 7, p. 391–393. https://doi.org/10.1134/S1028335807070129
5. Levin V.A., Vershinin A.V. 2015, “Nelinejnaya vy‘chislitel‘naya mekhanika prochnosti. Tom 2. Chislenny‘e metody‘. Parallel‘ny‘e vy‘chisleniya na E‘VM. [Nonlinear Computational Strength Mechanics. Vol. 2. Numerical Methods. Parallel computing.]”, Pod obshh. red. V.A. Levina. (in Russian). Fizmatlit, Moscow. 544 p.
6. Levin, V.A., Zingerman, K.M., Krapivin, K.Y. 2023, “Numerical solution of stress concentration problems in elastic-plastic bodies under the superposition of finite deformations”, Advanced Structured Materials. V. 198. P. 305–323. doi: 10.1007/978-3-031-43210-1_18.
7. Lee E. H. 1969, “Elastic-plastic deformation at finite strains”, Journal of Applied Mechanics. Vol. 36. Issue 1. P. 1–6.
8. Simo, J. C., Hughes, T.J.R. 1998, “Computational Inelasticity”, Interdisciplinary Applied Mathematics. Springer, New York. Vol. 7, 392 p.
9. Zienkiewicz, O.C., Taylor, R.L., Fox, D.D. 2014, “The finite element method for solid and structural mechanics”, Elsevier, 7-th edition, 624 p.
10. Komatitsch, D., Vilotte, J. P. 1998, “The spectral element method: An efficient tool to simulate the seismic response of 2D and 3D geological structures”, Bull. Seismol. Soc. Am. V. 88, no. 2. P. 368–392. doi: 10.1785/BSSA0880020368.
11. Konovalov D. Vershinin A., Zingerman K., Levin V. 2017, “The implementation of spectral element method in a CAE system for the solution of elasticity problems on hybrid curvilinear meshes”, Modeling and Simulation in Engineering. V. 2017, art. id. 1797561. doi: 10.1155/2017/1797561.
12. Abramov, S.M., Amel’kin, S.A., Kljuev, L.V., Krapivin, K.J., Nozhnickij, J.A., Servetnik, A.N., Chichkovskij, A.A. 2017, “Modeling the development of large plastic deformations in a rotating disk in the Fidesys program”, Chebyshevskii Sbornik. V. 18(3). P.15-27. (In Russ.) doi: 10.22405/2226-8383-2017-18-3-15-27.
13. Levin V.A., Zingerman K.M., Krapivin K.Yu., Yakovlev M.Ya. 2020, “Legendre spectral element for plastic localization problems at large scale strains”, Chebyshevskii Sbornik. V. 21(3). P. 306–316. (In Russ.) doi: 10.22405/2226-8383-2020-21-3-306-316.
14. Zingerman, K.M., Levin, V.A. 2009, “Redistribution of finite elastic strains after the formation of inclusions. Approximate analytical solution”, Journal of Applied Mathematics and Mechanics. V. 73, Issue 6. P. 710–721, https://doi.org/10.1016/j.jappmathmech.2010.01.011.
15. Zingerman, K.M., Levin, V.A. 2013, “Extension of the Lame–Gadolin problem for large deformations and its analytical solution”, Journal of Applied Mathematics and Mechanics. V. 77, Issue 2. P. 235-244, https://doi.org/10.1016/j.jappmathmech.2013.07.016.
Review
For citations:
Levin V.A., Zingerman K.M., Kartsev M.A. Numeric modeling of forced multistage growth of a hole in elastoplastic solid under superimposed large strains. Chebyshevskii Sbornik. 2024;25(4):228-238. (In Russ.) https://doi.org/10.22405/2226-8383-2024-25-4-228-238
Views:
80
Email this article 