Modeling of deformation damage of metals in case of plastic compression deformations
https://doi.org/10.22405/2226-8383-2023-24-5-331-342
Abstract
The performance properties of many precision mechanical engineering products manufactured by plastic deformation methods depend significantly on the structural deformation damage of their material. In this regard, methods of mathematical modeling of the complex physical process of structural damage are essential for calculating and predicting reliable operational characteristics of these products. According to systematic experimental data, the damage of metals in large plastic deformations is mainly associated with the formation, growth and coalescence of pores. To formulate the defining relations and determine the material functions included in them, a geometric model of elementary volume (RVE) with stochastically distributed
mesoelements (ME) representing a material shell with sometimes is used. For step-by-step calculation of strain increment tensor components at RVE- and ME- levels, their initial (undeformed) and current (deformed) configurations are determined by the metric tensor.
Calculation of damage measures based on experimentation, determination and modeling of material functions of plastic dilatancy and deviator deformation of ME depending on deviator deformation of RVE in plastic compression experiments, is given.
About the Author
Nikolai Dmitrievich Tutyshkin
Tula State University
Russian Federation
Russian Federation
doctor of technical sciences, professor
References
1. McClintock F. & Argon A. 1970, “Deformation and destruction of materials”, M.: Mir, 444 p. (In Russ.)
2. McClintock F. 1968, “A criterion for ductile fracture by the growth of holes”, J. Appl. Mech., vol. 90, pp. 363–371.
3. Bao Y. & Wierzbicki T. 2004, “On fracture locus in the equivalent strain and stress triaxiality space”, Int. J. Mech. Sci., vol. 46, pp. 81–98.
4. Ekobori T. 1971, “Physics and mechanics of destruction and strength of solids”, M.: Metallurgy, 264 p. (In Russ.)
5. Br¨unig M. 2003, “An anisotropic ductile damage model based on irreversible thermo-dynamics”, Int. J. Plasticity, vol. 19, pp. 1679–1713.
6. Bammann D. & Solanki K. 2010, “On kinematic, thermodynamic, and kinetic coupling of a damage theory for polycrystalline material”, Int. J. Plasticity, vol. 26, pp. 775-793.
7. Khan A. & Liu H. 2012, “A new approach for ductile fracture prediction on Al 2024-T351 alloy”, Int. J. Plasticity, vol. 35, pp. 1–12.
8. Hosokava A., Wilkinson D., Kang J. & Maire E. 2013, “Onset of void coalescence in uniaxial tension studied by continuous X-ray tomography”, Int. J. Acta Materialia, vol. 61, pp. 1021- 1036.
9. Tutyshkin N.D, M¨uller W.X, Wille R. & Zapara M.A. 2014, “Strain-induced damage of metals under large plastic deformation: Theoretical framework and experiments”, Int. J. of Plasticity, vol. 59, pp. 133–151.
10. Tutyshkin N.D. & Travin V.Yu. 2022, “Tensor theory of deformation damage”, Chebyshevskii sbornik, vol. 23, no 5, pp. 320 – 336. (In Russ.)
11. Hill R. 1950, “Mathematical theory of plasticity”, M.: State. edition of the technical-theoretical literature, 407 p.
12. Dunand M., Maertens A., Luo M. & Mohr D. 2012, “Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part I: Plasticity”, Int. J. Plasticity, vol. 36, pp. 34–49.
13. Luo M., Dunand M. & Mohr D. 2012, “Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part II: Ductile fracture”, Int. J. Plasticity, vol. 32-33, May, pp. 36–58.
14. Bao Y. & Wierzbicki T. 2005, “On the cut-off value of negative triaxiality for fracture”, J. Eng. Fract. Mech., vol. 72, pp. 1049–1069.
15. Zapara M.A., Tutyshkin N.D, M¨uller W.X. & Wille R. 2012, “Constitutive equations of a tensorial model for ductile damage of metals”, J. Continuum Mechanics and Thermodynamics, vol. 24, pp. 697-717.
Review
For citations:
Tutyshkin N.D. Modeling of deformation damage of metals in case of plastic compression deformations. Chebyshevskii Sbornik. 2023;24(5):331-342. (In Russ.) https://doi.org/10.22405/2226-8383-2023-24-5-331-342
Views:
268
Email this article 